If you like beautiful tiles in your bathroom, one of the downsides is the grout. It keeps the tiles together (yay!), but because it’s porous and light-colored, it’s quite prone to stains and damage from water. (Which makes you wonder: is there no other material we could use that isn’t so not-water-friendly?
From daily maintenance to grout Montreal, Laval replacement, here’s your go-to, Ultimate Guide to grout cleaning and maintenance. Keep your grout clean, extend its life, and avoid premature time- and money-wasting grout replacement Montreal, Laval.
Montreal, Laval Every day
A daily wiping-and-spraying routine after your bath or shower is essential to keep your tiles clean and prevent premature staining and damage. Sure, it might seem a little annoying, but it’ll save you tons of work in the long run.
The first thing to do is to get a good squeegee. This Good Grips squeegee is easy to hold and works great. Every time you shower or take a bath, run the squeegee on the tile and glass walls and doors to remove excess water.
Then, you should lightly spray your tile and glass with a mild, daily shower cleaner. You can make your own by mixing a 4:1 water to vinegar solution or get a green cleaner like Method Daily Shower Spray.
I love the Method products in general because of their great scent and excellent cleaning power. But if you can’t find that specific product, many cleaning brands have a daily shower cleaner, so try and see which one you like best.
But it doesn’t mean you get away from…
Montreal, Laval Weekly cleaning
Even though you will definitely keep your walls and glass cleaner with the above routine, you’ll still need to give your shower or bath a deep clean at least every week (or at worst, every 2 weeks). Despite your daily efforts, body oils and soap scum will still cling to the surfaces.
So, weekly or bi-weekly, give your grout a nice preventative clean with a water and baking soda paste. If your grout seems a little more strained than usual, use hydrogen peroxide instead of water—but be careful not to mix hydrogen peroxide with vinegar. If you have used vinegar as your daily spray before cleaning the shower, make sure to rinse it off thoroughly before using hydrogen peroxide in the grout.
For seriously stained grout Montreal, Laval
Sometimes, either through laziness or simple lack of attention, grout becomes stained and grimy to the point where your daily shower cleaner or baking soda paste can’t quite do the job anymore. In this case, you need to break out the bleach to get rid of the stains.
One easy way to focus the power of bleach where you need it is to use a bleach pen. A bleach pen is great for smaller surfaces and just a little grout work, and minimizes potential contact with your tile—but I wouldn’t use it for cleaning your entire grout.
It’s amazing for a little extra strength where the weekly or bi-weekly cleaning just isn’t quite enough, but you don’t feel like bleaching your entire tile wall.
However, if you do think that your grout could use an overall disinfection and stain treatment, start with an oxygen-type powdered bleach like. This kind of bleach is gentler on your grout than the liquid, chloride-type stuff, and it’s usually sufficient to take care of your stubborn stains. Just make sure to mix it according to the manufacturer’s instructions in a well-ventilated area (that’s really important). Apply with a brush, let stand 10-15 minutes, and rinse with clean water.
If all else fails, yes, you can use a chlorine bleach spray, although it’s a bit harsher and harder to control. Test it on a small, inconspicuous area of your tile to make sure that it doesn’t damage it. Again, follow the directions and open a window, and rinse off with clean water too.